Birth Pool in a Box Personal Pool - Mini size with liner

Buy the full package with all the accessories needed for a water birth.

Features

One disposable liner is included with each pool and additional liners are available. Using a liner means two "containers" for the water, giving added protection against the unlikely event of a water leak.
Birth Pool in a Box has an internal depth of 26" and you can fill water to a depth of 23".
3 chamber design with 6 handles and an inflatable seat and floor allow for comfort for mom during labor and birth.
The sides of Birth Pool in a Box are made of 3 independent tubular chambers stacked on top of each other. If one of them should puncture by accident, only 1/3 of the wall height will be lost. This is safer for mother and baby and results in little to no water on your floor than a puncture into a single-chambered inflatable pool.
By deflating the middle chamber to the appropriate height once a woman is in the filled pool, the height of the pool can be adjusted for safe and comfortable access to the woman by her caregivers. Not every woman needs 28" high sides. Smaller woman or smaller midwives may find that by lowering the sides of the pool by several inches, they feel more comfortable. By adjusting this on the middle chamber, the rigidity and stability of the pool is maintained by the fully inflated top and bottom chamber.
Mothers want strong handles on the outside of the pool for use when leaning on the side facing out. They are angled at 30 degrees for comfort and secure the form-fitted disposable liner in place.
Once the pool is filled, the sides are sturdy enough for a 210 lb (95.5kg) person to sit on the side without collapsing it.
Inflation time: 5 minutes using a high powered air pump.
Filling time: 40 minutes to 3 hours (depending on the size of your hot water tank.)

Accessories

Here are some other items you may want to purchase with this pool:

Instruction Booklet

Download the color 12-page instruction booklet here.

The warranty on all personal Birth Pool in a Box pools is valid only if a new Birth Pool in a Box liner is used.

Specifications

Birth Pool in a Box	Regular	Mini

Shape	Ellipsoid (Egg)	Ellipsoid (Egg)

External max dimensions	76" X 65"	65" X 57"
	193cm x 165cm	165cm x 145cm

Internal max dimensions	56" X 45"	45" X 37"
	142cm X 114cm	114cm X 94cm

Internal depth	26"	26"
	66cm	66cm

Max. Water Depth	23" (55 cm)	23" (55 cm)

Rim width	10"	10"
	25cm	25cm

Built-in seat	Yes	Yes

Disposable liner	One included	One included

Handles on Outside	4	4

Handles on Top	2	2

Water Capacity - 80% full	172 gallons	127 gallons
	650 liters	480 liters

Water Capacity - 90% full	193 gallons	140 gallons
	730 liters	530 liters

Weight when filled (add weight of mother)	1450 lbs	1017 lbs
	650kg	480kg

Pool Material	Pool: 0.38mm PVC	Pool: 0.38mm PVC

Form-fitted disposable liner material	Liner: 0.20mm PVC	Liner: 0.20mm PVC

Care and Inflation Instructions

Per manufacture recommendations please allow your pool to warm to room temperature for up to 72 hours before unfolding and inflating.

We recommend that you test inflate your pool once soon after receiving it to check for any potential leaks.

Please contact In His Hands regarding a damaged or leaking pool within 1 week after receiving it to qualify for a refund/replacement. Thank you!

Magnolia Midwifery Custom Birth Kit